Weight:0.30 KGS

Width:10.00 (cm)

Height:10.00 (cm)

Depth:3.00 (cm)

3mm Rolled Hem Foot for IDT™ System

PART #820249096
SPECIALTY TYPE: DECORATIVE/CRAFTING SEWING, HEIRLOOM SEWING, HOME DECORATION, UTILITY/GARMENT SEWING

Hemming prevents the edges from fraying and results in a clean, durable edge. With the Rolled Hem Foot, you can hem light to medium weight fabrics for clothing and home decorating items without having to pre-iron the fabric edges.

Installation Method: Snap On

Condition: NEW
Made in Taiwan
Product from PFAFF Original

How to use:

1.  Select a straight stitch, snap on the Rolled Hem Foot and engage IDT™ system (if availableon your machine). If needed, press only the beginning of the hem to 2, 3 or 4 mm wide, depending on the size of your foot. Place it flat in the groove under the foot and sew, pulling the cut edge of the fabric into the scroll of the hemmer. Lower the foot and continue sewing while holding for a few stitches. Lower the needle into the fabric to hold it in place. Then raise the presser foot, keeping the cut edge up in front of the foot.
2.  Do not allow fabric to run under the right half of the presser foot.

WORKSWITHMACHINE

• B
• C
• D
• E
• F
• G
• J
• K